VRE- Mini Platform 650
Description:
Model VRE 650 is a Strain Gage based low profile bending beam Load Cell and is ideal for Bench, Counting, Floor, Postal and Retail Scales. It is designed for low eccentric load sensitivity. It is Constructed from Anodized Aluminum Alloy.
- Dimension (mm) : Size: 150x40x25(mm) Thread hole: 5-M6
- Wiring Scheme
- Red + (Input +) White - (Output -) Black - (Input -) Green + (Output +)
| Performance Specification | |
|---|---|
| Standard Capacities | 3,10, 20, 40, 50, 60, 75, 100 Kgf |
| Excitation Voltage | 10 VDC- Maximum 15 VDC |
| Nominal Output | 2.0 mV/ V |
| Non - Linearity | < ±0.025% FSO |
| Hysteretic | < ±0.02% FSO |
| Non-Repeatability | < ±0.01% FSO |
| Creep (30 minutes) | < ±0.03% FSO |
| Zero Balance | ±1.0% FSO |
| Input Resistance | 400 ± 15 Ohms |
| Output Resistance | 350 ± 5 Ohms |
| Insulation Resistance (50 VDC) | > 1000 Mega Ohms |
| Cable Length (4 Core Screened) | 500 mm. Minimum |
| Safe Overload of Rated Capacity | 150% |
| Ultimate Overload of Rated Capacity | 200% |
| Temp. Compensated Range | 0-60 0 C |
| Temperature Effect on Output | < 0.0015% FSO/ 0 C |
| Temperature Effect on Zero | < 0.0020% FSO/ 0 C |
| Platter Size | 300mm X 300mm |
| Eccentric Load Effect | < 0.02% of FSO at 1/3 rated load placed within the specified sized platter |
| Deflection | < 0.5 mm at FSO |
| Tightening Torque | &1.5 m.kg. |
| Finish & Construction | Aluminium Alloy |
| Environmental Protection Class | IP65 |
view pdf