VRE-803( SINLE ENDED SHEAR BEAM LOAD CELL)
Description:
This is a Strain Gage based, single ended Shear Beam Load Cell. Intended for use in platform scales, tank and hopper weighing systems. It is constructed from high alloy tool Steel. The cell is sealed against moisture ingression for use in wash-down areas and it is Electro less Nickel plated for corrosion resistance. It is low cost ideal Load Cell for industrial automation applications.
| Performance Specification | |
|---|---|
| Standard Capacities | 100*, 150*, 200*, 300,500*, 750 - Kgf 1, 1.5, 2, 2.5, 3, 5, 7.5, 10 - Tf |
| Excitation Voltage | 10 VDC- Maximum 15 VDC |
| Nominal Output | 3.0 m V/ V |
| Non - Linearity | < ±0.025% FSO |
| Hysteretic | < ±0.02% FSO |
| Non-Repeatability | < ±0.01% FSO |
| Creep (30 minutes) | < ±0.03% FSO |
| Zero Balance | ±5.0% FSO |
| Input Resistance | 420 ± 15 Ohms |
| Output Resistance | 350 ± 3 Ohms |
| Insulation Resistance (50 VDC) | > 1000 Mega Ohms |
| Cable Length (4 Core Screened) | 5 mt. Minimum |
| Safe Overload of Rated Capacity | 150% |
| Ultimate Overload of Rated Capacity | 300% |
| Side Load Discrimination | 500 : 1 |
| Temp. Compensated Range | 0-60 0C |
| Deflection | < 0.5 mm at FSO |
| Tightening Torque | See table below. |
| Finish & Construction | 803 - Electro less Nickel Plated Tool Steel |
| Environmental Protection Class | IP67. |
view pdf